L Shape Sofa Dimensions: 5, 6 and 7 Seater Sizes in Feet and cm

A standard 5-seater L-shape sofa is 8.5 to 9.5 ft long on the main side and 5.5 to 6.5 ft on the chaise side, with a seat depth of about 3 ft. The chart gives typical sizes for each seating capacity, in feet and centimetres.

The other measurements that matter

• ●Overall height: 80 to 90 cm (32 to 35 inches) to the top of the back
• ●Seat height from the floor: 43 to 46 cm (17 to 18 inches)
• ●Seat cushion depth: 55 to 60 cm (22 to 24 inches)
• ●Armrest width: 15 to 25 cm (6 to 10 inches) each

These are typical sizes, not fixed ones. A made-to-order sofa is built to the centimetre, which matters when a wall is 20 cm too short for a standard size.

The L-shaped sectional sofa has overtaken traditional 3+1+1 sofa sets as the undisputed centerpiece of modern Indian homes. By utilizing room corners and eliminating awkward empty gaps, a sectional provides superior seating capacity within a cohesive, uncluttered footprint. Whether hosting family gatherings, stretching out for movie nights, or anchoring an open-concept living-dining area, the right sectional defines the comfort and character of your home.

Before ordering an L-shape sectional, exact space planning is essential to prevent a cramped living room:

• ●Left-Arm Facing (LAF) vs Right-Arm Facing (RAF): When standing in front of the sofa looking at it, LAF has the chaise on your left; RAF has it on your right. Ensure the chaise does not block doorway entry, balcony access, or natural paths to the kitchen.
• ●Walkway Circulation Clearances: Maintain at least 30 to 36 inches (75 to 90 cm) of open clearance between the sofa edge and coffee tables, TV consoles, or passage doors.
• ●Apartment Logistics Sizing: Always verify that sectional pieces can navigate apartment elevators, tight stairwell landings, and entry doors. Modular sectionals that snap together on-site provide an effortless solution for high-rise apartments.

You need a tape measure and ten minutes. Take the measurements in this order:

1. 1Measure both walls of the corner where the sofa will sit, from the corner to the first thing in the way: a door, a window that opens inward, a switchboard or a wardrobe.
2. 2Take 75 to 90 cm (30 to 36 inches) off each wall for the walkway at the open end. What is left is the longest main side (A) and chaise side (B) the corner can take.
3. 3Decide which wall gets the long side. The chaise should sit on the side away from the main doorway.
4. 4Mark the outline on the floor with masking tape or newspaper and leave it for a day. Walk around it, open the balcony door, pull out the dining chairs.
5. 5Measure the delivery path: the main door, the lift door and lift depth, and the tightest stair landing. An L-shape arrives in two pieces, so check the longer piece.

Worked example: one wall is 12 ft and the other is 9 ft. Taking 3 ft off each for walkways leaves 9 ft for the main side and 6 ft for the chaise. A standard 5-seater (about 9 × 6 ft) fits; a 6-seater does not.

To test a size against your room before ordering, enter both in the sofa room fit planner. It also checks whether the sofa passes through your doorway.

What lies inside your sofa determines whether it will feel comfortable for a decade or sag into a painful pit within 18 months:

• ●Core Cushioning: Insist on 40-density High-Resilience (HR) cold-cure foam. It features instantaneous elastic rebound and maintains its structured loft through years of daily family use.
• ●Dual-Layer Topping: A 2-inch top topper of 32-density supersoft foam or siliconized feather-touch poly-fill gives the initial luxurious sink-in feel without compromising structural support.
• ●Foundation Suspension: Heavy-gauge zig-zag serpentine steel springs paired with cross-woven 70mm elastic webbing distribute weight evenly across the entire frame.

Mass-produced imported sectionals often use cheap particle board frames and low-density sponge that deteriorates in humid climates. Hitech Home Decor builds handcrafted luxury sectionals tailored to your exact floor plan:

• ●Solid Hardwood Frames: Kiln-dried seasoned Sal, Marandi, and Teak hardwood framing with corner-blocked joinery and a 10-year structural warranty.
• ●1,000+ Performance Fabrics: Choose from imported bouclés, anti-scratch pet-friendly velvets, spill-resistant linen textures, and genuine top-grain leathers.
• ●Custom Dimensions & Firmness: Customize your sofa length, chaise depth, seat height, and back cushion firmness to fit your personal ergonomic posture.
• ●4.9★ Google Reputation & Goa Workshop: Visit our Goa manufacturing studio to inspect frames and foam layers in person, or order custom fabrication delivered across India.

Extend the life and beauty of your sectional couch:

1. 1Rotate Reversible Cushions: Flip and rotate seat and back cushions every month to ensure even wear patterns across all seating spots.
2. 2Immediate Spill Response: For coffee or food spills on performance fabric, blot with a dry paper towel immediately. Avoid rubbing, which pushes liquids into the foam core.
3. 3Annual Deep Extraction: Schedule professional steam or dry-foam extraction cleaning every 12 to 18 months to remove deep dust mites and maintain vibrant fabric color.