Loading…
Enter the width and height of the wall and the size of the panel. The calculator gives the number of panels to order, with an allowance for cuts, and the length of edge trim.
Panel sizes differ between makes. Change the two numbers below to match the panel you choose.
17
panels, including 10% for cuts and waste
Panels are fixed vertically, side by side. The count comes from the width of the wall, not its area.
Divide the wall width by the width of one panel and round up.
If the wall is taller than one panel, each column needs more than one piece.
Multiply the two and add about 10 percent for cuts around sockets, corners and edges.
Trim runs around the outside of the panelled area.
PVC panels, WPC fluted louvers, charcoal panels and 3D panels, supplied and fitted across Goa with a free measurement.
With planks 10 inches wide and 10 feet long, a wall 10 feet wide needs 12 planks side by side, and one plank reaches the full height. Adding 10 percent for cuts gives 14 planks. Panel widths differ between makes, so enter the width of the panel you choose.
Divide the wall width by the panel width and round up: that is the number of panels side by side. Divide the wall height by the panel length and round up: that is the pieces in each column. Multiply the two, then add about 10 percent for cuts and waste.
About 10 percent on a plain wall. Allow 15 percent if the wall has windows, sockets, a sloping edge or several corners.
For a small window, no: the offcuts are rarely long enough to reuse, so order for the full wall. For a large opening, measure the wall on each side of it as a separate wall and add the results.
Yes. We supply and fit PVC panels, WPC louvers, charcoal panels and 3D panels across Goa, and measure free of charge.